Difference between revisions of "NDMaterial Command"
From OpenSeesWiki
Jump to navigationJump to search| Line 24: | Line 24: | ||
*[[J2 Plasticity Material]] | *[[J2 Plasticity Material]] | ||
*[[Drucker Prager | Drucker Prager Material]] | *[[Drucker Prager | Drucker Prager Material]] | ||
| − | [[Damage2p | Damage Model]] | + | *[[Damage2p | Damage Model]] |
*[[Plane Stress Material]] | *[[Plane Stress Material]] | ||
*[[Plane Strain Material]] | *[[Plane Strain Material]] | ||
Revision as of 03:39, 26 September 2012
This command is used to construct an NDMaterial object which represents the stress-strain relationship at the gauss-point of a continuum element.
| ndMaterial matType? arg1? ... |
The type of material created and the additional arguments required depends on the matType? provided in the command.
NOTE:
The valid queries to any uniaxial material when creating an ElementRecorder are 'strain', and 'stress'. Some materials have additional queries to which they will respond. These are documented in the NOTES section for those materials.
The following contain information about matType? and the args required for each of the available material types:
- Elastic Isotropic Material
- J2 Plasticity Material
- Drucker Prager Material
- Damage Model
- Plane Stress Material
- Plane Strain Material
- Multi Axial Cyclic Plasticity
- Bounding Cam Clay
- Plate Fiber Material
- Plane Stress Concrete Materials
- Cyclic ElasticPlasticity
- Contact Materials for 2D and 3D
- Wrapper material for Initial State Analysis
- UC San Diego soil models (Linear/Nonlinear, dry/drained/undrained soil response under general 2D/3D static/cyclic loading conditions (please visit UCSD for examples)
- UC San Diego Saturated Undrained soil
- UCDavis Soil Models
