Bounding Cam Clay

• Command_Manual
  • Tcl Commands
  • Modeling_Commands
    • model
    • uniaxialMaterial
    • ndMaterial
    • frictionModel
    • section
    • geometricTransf
    • element
    • node
    • sp commands
      • fix
      • fixX
      • fixY
      • fixZ
    • mp commands
      • equalDOF
      • rigidDiaphragm
      • rigidLink
    • timeSeries
    • pattern
    • mass
    • block commands
      • block2D
      • block3D
    • region
    • rayleigh
  • Analysis Commands
    • constraints Command
    • numberer Command
    • system Command
    • test Command
    • algorithm Command
    • integrator Command
    • analysis Command
    • eigen Command
    • analyze Command
  • Output Commands
    • recorder
    • record
    • print
    • printA
    • logFile
    • RealTime_Output_Commands
  • Misc Commands
    • eleResponse Command
    • getTime Command
    • getEleTags Command
    • getNodeTags
    • loadConst Command
    • nodeCoord Command
    • nodeDisp Command
    • nodeVel Command
    • nodeAccel Command
    • nodeEigenvector Command
    • nodeBounds
    • print Command
    • remove Command
    • reset Command
    • testIter
    • testNorms
    • wipe Command
    • exit Command
  • DataBase Commands
    • Template:DataBaseCommandsMenu

---

This command is used to construct a multi-dimensional bounding surface Cam Clay material object after Borja et al. (2001).

nDMaterial BoundingCamClay $matTag $massDensity $C $bulkMod $OCR $mu_o $alpha $lambda $h $m

$matTag	integer tag identifying material
$massDensity	mass density
$C	ellipsoidal axis ratio
$bulkMod	initial bulk modulus
$OCR	overconsolidation ratio
$mu_o	elastic shear modulus
$alpha	pressure-dependent parameter
$lambda	soil compressibility index for virgin loading
$h	hardening parameter
$m	hardening parameter

The material formulations for the BoundingCamClay object are "ThreeDimensional" and "PlaneStrain"

---

Code Developed by Chris McGann & Pedro Arduino, at the University of Washington

---

Notes

---

References

Borja, R.I., Lin, C.-H., and Montans, F.J. (2001) 'Cam-Clay plasticity, Part IV: Implicit integration of anisotropic bounding surface model with nonlinear hyperelasticity and ellipsoidal loading function' Computer Methods in Applied Mechanics and Engineering. 190(26), 3293-3323, doi: 10.1016/S0045-7825(00)00301-7.

---

Theory

<math> x = y </math>