Flatsliderbearing for 2d 2dof model

Forum for OpenSees users to post questions, comments, etc. on the use of the OpenSees interpreter, OpenSees.exe

Moderators: silvia, selimgunay, Moderators

Post Reply
Jhno
Posts: 214
Joined: Sat May 05, 2012 2:55 pm
Location: Laval

Re: Flatsliderbearing for 2d 2dof model

Post by Jhno » Tue Jul 25, 2017 8:15 am

Zerolength element ?
Top
selimgunay
Posts: 913
Joined: Mon Sep 09, 2013 8:50 pm
Location: University of California, Berkeley

Re: Flatsliderbearing for 2d 2dof model

Post by selimgunay » Thu Jul 27, 2017 10:16 pm

You can use it for a 2D problem, please see the descriptions and examples in the below link

http://opensees.berkeley.edu/wiki/index ... ng_Element
Top
selimgunay
Posts: 913
Joined: Mon Sep 09, 2013 8:50 pm
Location: University of California, Berkeley

Re: Flatsliderbearing for 2d 2dof model

Post by selimgunay » Mon Jul 31, 2017 11:20 pm

Cagatay merhaba,

I think you can fix the rotational DOF. It seems this is what is done in the examples in the wiki page.

http://opensees.berkeley.edu/wiki/index ... er2d_2.tcl
Top
Post Reply

Return to “OpenSees.exe Users”