Hi everybody,
Is the zeroLengthND element available in the new version of OpenSees(2.1.0)?
I used this element in my model in which material type is Drucker-Prager, but I got a warning as follows:
“ZerolengthND:: --NDMaterial not of order 2 or 3”
Would you please help me?
Thanks again
ZeroLengthND in opensees 2.1.0
Moderator: Moderators
-
aminrahmani
- Posts: 25
- Joined: Tue Nov 11, 2008 4:43 am
- Location: University of British Columbia
- Contact:
ZeroLengthND in opensees 2.1.0
Amin Rahmani
-
aminrahmani
- Posts: 25
- Joined: Tue Nov 11, 2008 4:43 am
- Location: University of British Columbia
- Contact:
ZeroLengthND in opensees 2.1.0
Hi,
My question is that which materials are of order 2 and 3? I think Drucker-Prager model is of order 3, Isn’t it? I used the following command for zeroLengthND element, but I got the same message.
Element zeroLengthND $eleTag $iNode $jNode $matTag
What is the problem? Which type of material should I use?
Many Thanks!
My question is that which materials are of order 2 and 3? I think Drucker-Prager model is of order 3, Isn’t it? I used the following command for zeroLengthND element, but I got the same message.
Element zeroLengthND $eleTag $iNode $jNode $matTag
What is the problem? Which type of material should I use?
Many Thanks!
Amin Rahmani
-
CarloDan2009
- Posts: 1
- Joined: Fri May 29, 2009 6:29 pm
Infinite element
Is this applicable to used this zeroLengthND element to become infinite element?.
_________________
[url=http://www.ballyhoobanners.com/]Vinyl Banners[/url] | [url=http://www.xcesswebhosting.com/]affordable SEO companies[/url]
_________________
[url=http://www.ballyhoobanners.com/]Vinyl Banners[/url] | [url=http://www.xcesswebhosting.com/]affordable SEO companies[/url]