Triangle elements

This forum is for issues related to parallel processing
and OpenSees using the new interpreters OpenSeesSP and OpenSeesMP
Post Reply
sanazzz
Posts: 16
Joined: Sun Oct 23, 2016 6:32 pm

Triangle elements

Post by sanazzz » Thu Apr 27, 2017 7:25 am

Hi,

I am getting an error while I run a model in Openseessp with the triangle elements-tri31 (the same model works fine with quad elements), and I am wondering is there anyone else who faced the same problem? Does Mumps support tri31 elements?

This is the error:

""""
Fatal error in MPI_Recv: Message truncated, error stack:
MPI_Recv(186).....................: MPI_Recv(buf=000000000DB4B3F0, count=1, MPI_INT, src=0, tag=0, MPI_COMM_WORLD, status=0000000003BAF8C0) failed
MPIDI_CH3U_Receive_data_found(129): Message from rank 0 and tag 0 truncated; 24 bytes received but buffer size is 4

job aborted:
rank: node: exit code[: error message]
0: PeymanPC: 123
1: PeymanPC: 1: process 1 exited without calling finalize
child process exited abnormally
"""""

Bests

fmk
Site Admin
Posts: 5860
Joined: Fri Jun 11, 2004 2:33 pm
Location: UC Berkeley
Contact:

Re: Triangle elements

Post by fmk » Thu Apr 27, 2017 7:45 pm

it is either Mumps or the triangle element not sending themselves correctly .. does the error occur on the first analysis step?

sanazzz
Posts: 16
Joined: Sun Oct 23, 2016 6:32 pm

Re: Triangle elements

Post by sanazzz » Fri Apr 28, 2017 6:55 am

Yes. The analysis does not start at all. I found this could be the source but I do not know how to fix it.

sravanim
Posts: 15
Joined: Thu Oct 12, 2017 1:11 am
Location: united states
Contact:

Re: Triangle elements

Post by sravanim » Thu Oct 26, 2017 7:36 am

I am also face this problem? The problem is occur in starting stage only...Any one suggest me regarding this

dgale
Posts: 47
Joined: Fri Jan 15, 2016 4:01 am
Location: UPM

Re: Triangle elements

Post by dgale » Fri Jul 06, 2018 12:38 am

Some elements are not created for parallel compiting. In my case, I use section LayeredShell which doesn't work in parallel.

peterlee
Posts: 4
Joined: Thu Jan 24, 2019 9:53 pm
Contact:

Re: Triangle elements

Post by peterlee » Thu Jan 24, 2019 10:08 pm

I am also faced same problem.

Post Reply