dynamic analysis not performing

This forum is for issues related to parallel processing
and OpenSees using the new interpreters OpenSeesSP and OpenSeesMP

Moderator: selimgunay

Post Reply
CHANDANA
Posts: 11
Joined: Thu Jan 21, 2016 1:57 am
Location: KTU

dynamic analysis not performing

Post by CHANDANA » Thu Feb 09, 2017 10:03 pm

Sir,

I was analysing a 3d frame model using OpenSeesMP by applying 2 ground input motions. But, i am obtaining an exactly same result values for both the ground motions for every time step. Also,the values are as same as the gravity analysis result. Dynamic analysis is not being performed. I am not able to track the reason for this. I kindly request for your help to solve this.

The main input file is as below:

wipe
set pid [getPID]
set Np [getNP]
set recordsFileID [open "peerRecord.txt" r]
set count 0;

source ReadRecord.tcl

set tStart [clock clicks -milliseconds]

foreach gMotion [split [read $recordsFileID] \n] {
if {[expr $count % $Np] == $pid} {


puts $pid
puts $Np

source modelanalysis.tcl

pattern Plain 1 1 {
eleLoad -ele 36 37 38 39 40 44 45 46 47 48 52 53 54 55 56 57 58 59 60 61 74 78 79 80 81 82 83 84 85 86 129 130 131 132 133 137 138 139 140 141 145 146 147 148 149 150 151 152 153 154 167 171 172 173 174 175 176 177 178 179 222 223 224 225 226 230 231 232 233 234 238 239 240 241 242 243 244 245 246 247 260 264 265 266 267 268 269 270 271 272 315 316 317 318 319 323 324 325 326 327 331 332 333 334 335 336 337 338 339 340 353 357 358 359 360 361 362 363 364 365 408 409 410 411 412 416 417 418 419 420 424 425 426 427 428 429 430 431 432 433 446 450 451 452 453 454 455 456 457 458 501 502 503 504 505 509 510 511 512 513 517 518 519 520 521 522 523 524 525 526 539 543 544 545 546 547 548 549 550 551 -type -beamUniform $wz -$QBeam
eleLoad -ele 41 42 43 49 50 51 62 63 64 65 66 67 68 69 70 71 72 73 75 76 77 87 88 89 90 91 92 93 134 135 136 142 143 144 155 156 157 158 159 160 161 162 163 164 165 166 168 169 170 180 181 182 183 184 185 186 227 228 229 235 236 237 248 249 250 251 252 253 254 255 256 257 258 259 261 262 263 273 274 275 276 277 278 279 320 321 322 328 329 330 341 342 343 344 345 346 347 348 349 350 351 352 354 355 356 366 367 368 369 370 371 372 413 414 415 421 422 423 434 435 436 437 438 439 440 441 442 443 444 445 447 448 449 459 460 461 462 463 464 465 506 507 508 514 515 516 527 528 529 530 531 532 533 534 535 536 537 538 540 541 542 552 553 554 555 556 557 558 -type -beamUniform -$QGird $wz
eleLoad -ele 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 -type -beamUniform $wz $wz -$QdlCol
}


set ok [doGravity]

recorder Node -file topdisp.out -time -node 243 -dof 1 2 3 disp

pattern Plain 2 1 {

eleLoad -ele 36 37 38 39 40 78 81 82 83 84 85 86 129 130 131 132 133 171 174 175 176 177 178 179 222 223 224 225 226 264 267 268 269 270 271 272 315 316 317 318 319 357 360 361 362 363 364 365 408 409 410 411 412 450 453 454 455 456 457 458 501 502 503 504 505 543 546 547 548 549 550 551 -type -beamUniform $wz -4.5

eleLoad -ele 49 50 51 75 76 77 87 93 142 143 144 168 169 170 180 186 235 236 237 261 262 263 273 279 328 329 330 354 355 356 366 372 421 422 423 447 448 449 459 465 514 515 516 540 541 542 552 558 -type -beamUniform -5.625 $wz

eleLoad -ele 41 42 43 62 63 64 65 66 67 68 69 70 71 72 73 88 89 90 91 92 134 135 136 155 156 157 158 159 160 161 162 163 164 165 166 181 182 183 184 185 227 228 229 248 249 250 251 252 253 254 255 256 257 258 259 274 275 276 277 278 320 321 322 341 342 343 344 345 346 347 348 349 350 351 352 367 368 369 390 371 413 414 415 434 435 436 437 438 439 440 441 442 443 444 445 460 461 462 463 464 506 507 508 527 528 529 530 531 532 533 534 535 536 537 538 553 554 555 556 557 -type -beamUniform -11.25 $wz

eleLoad -ele 44 45 46 47 48 52 53 54 55 56 57 58 59 60 61 74 79 80 137 138 139 140 141 145 146 147 148 149 150 151 152 153 154 167 172 173 230 231 232 233 234 238 239 240 241 242 243 244 245 246 247 260 265 266 323 324 325 326 327 331 332 333 334 335 336 337 338 339 340 353 358 359 416 417 418 419 420 424 425 426 427 428 429 430 431 432 433 446 451 452 509 510 511 512 513 517 518 519 520 521 522 523 524 525 526 539 544 545 -type -beamUniform $wz -9
}

set ok [doGravity]
recorder Node -file topdispp.out -time -node 243 -dof 1 2 3 disp
wipeAnalysis
loadConst -time 0.0

if {$ok == 0} {
set gMotionList [split $gMotion "/"]
set gMotionDir [lindex $gMotionList end-1]
set gMotionNameInclAT2 [lindex $gMotionList end]
set gMotionName [string range $gMotionNameInclAT2 0 end-4 ]

ReadRecord ./$gMotionDir$gMotionName.AT2 ./$gMotionDir$gMotionName.dat dT nPts

set Gaccel "Series -dt $dT -filePath $gMotionDir$gMotionName.at2 -factor 1";
pattern UniformExcitation 3 1 -accel "$Gaccel"

if {$nPts != 0} {

recorder Node -file $gMotionDir$gMotionName.out -time -node 243 -dof 1 2 3 -dT $dT disp

doDynamic $dT $nPts

if {$ok == 0} {
puts "$gMotionDir $gMotionName OK"
} else {
puts "$gMotionDir $gMotionName FAILED"
}

} else {
puts "$gMotion - NO RECORD"
}
}

}
incr count 1;

}

set tEnd [clock clicks -milliseconds]
set duration [expr $tEnd-$tStart]

puts "Duration $duration"

fmk
Site Admin
Posts: 5883
Joined: Fri Jun 11, 2004 2:33 pm
Location: UC Berkeley
Contact:

Re: dynamic analysis not performing

Post by fmk » Thu Feb 09, 2017 11:38 pm

do you have nodal mass defined?

CHANDANA
Posts: 11
Joined: Thu Jan 21, 2016 1:57 am
Location: KTU

Re: dynamic analysis not performing

Post by CHANDANA » Tue Feb 14, 2017 10:25 am

No sir, i have not defined the nodal mass. But, is it possible that dynamic analysis does not perform due to this.

fmk
Site Admin
Posts: 5883
Joined: Fri Jun 11, 2004 2:33 pm
Location: UC Berkeley
Contact:

Re: dynamic analysis not performing

Post by fmk » Tue Feb 14, 2017 10:31 am

the load if applied through a uniform motion is -M * accel .. if no mass no load

CHANDANA
Posts: 11
Joined: Thu Jan 21, 2016 1:57 am
Location: KTU

Re: dynamic analysis not performing

Post by CHANDANA » Sun Mar 05, 2017 9:17 pm

thank you sir. Its working now.

Post Reply