Windows 10

This forum is for issues related to parallel processing
and OpenSees using the new interpreters OpenSeesSP and OpenSeesMP

Moderator: selimgunay

Post Reply
sanazzz
Posts: 16
Joined: Sun Oct 23, 2016 6:32 pm

Windows 10

Post by sanazzz » Sun Oct 23, 2016 6:36 pm

Hi,

Have you ever tried to run OpenSeesSP on windows 10? I am wondering should we again install MPICH or MS-MPI for windows 10? MPICH does not support windows after 1.p1.1 version.
I installed and registered MPICH on my windows 10 but it seems that there is a problem running the model in parallel. Then I tried to install MS-MPI and I was not successful in this step.


You time in appreciated.



Thanks

fmk
Site Admin
Posts: 5883
Joined: Fri Jun 11, 2004 2:33 pm
Location: UC Berkeley
Contact:

Re: Windows 10

Post by fmk » Thu Oct 27, 2016 1:30 pm

sorry i do not have windows 10 to test on.

sanazzz
Posts: 16
Joined: Sun Oct 23, 2016 6:32 pm

Re: Windows 10

Post by sanazzz » Tue Nov 01, 2016 6:02 pm

It is solved and works perfectly.


Just a quick question, have you ever faced a condition that, OpenSees sequential solves a problem perfectly but OpenSeesSP cannot solve it?

By not solving, I mean it seems to be solving but it does not record anything.

My model has two material if it helps. I tried SP for other homogeneous models and it worked fine. But, it does not work for the mentioned model. It seems that it solves nothing.


Bests

sanazzz
Posts: 16
Joined: Sun Oct 23, 2016 6:32 pm

Re: Windows 10

Post by sanazzz » Tue Nov 01, 2016 9:11 pm

For others to know, it was because of the type of the flag I used for recorder.

samansadeghii
Posts: 7
Joined: Fri Nov 25, 2016 11:04 pm

Re: Windows 10

Post by samansadeghii » Tue Nov 29, 2016 7:51 am

Your model is too small to run with OpenSeesMP

jzwang
Posts: 1
Joined: Fri Mar 02, 2018 2:00 pm

Re: Windows 10

Post by jzwang » Fri Mar 02, 2018 2:05 pm

HI cgtydmrc,
I run into the same problem as "child killed: unknown signal".
And the applications were installed as "run as administrator" but it did not work.
What version of MPICH did you use in your windows 10?

madarchod
Posts: 1
Joined: Wed Apr 18, 2018 12:50 am

Re: Windows 10

Post by madarchod » Wed Apr 18, 2018 1:02 am

with "Running as administrator" worked perfect.

advanceins
Posts: 1
Joined: Tue May 14, 2019 9:47 am
Location: India
Contact:

Re: Windows 10

Post by advanceins » Tue May 14, 2019 9:57 am

Hello, I check and its work.

jamesnelson
Posts: 1
Joined: Sat Jul 13, 2019 2:31 am

Re: Windows 10

Post by jamesnelson » Sat Jul 13, 2019 3:02 am

sanazzz wrote:
> It is solved and works perfectly.
>
>
> Just a quick question, have you ever faced a condition that, OpenSees
> sequential solves a problem perfectly but OpenSeesSP cannot solve it?
>
> By not solving, I mean it seems to be solving but it does not record
> anything.
>
> My model has two material if it helps. I tried SP for other homogeneous
> models and it worked fine. But, it does not work for the mentioned model.
> It seems that it solves nothing.
>
>
> Bests

I've Windows 7 installed PC, and I'm planning to buy a laptop with windows 10. Can you explain the steps of how you have resolved the issue? I would like to run OpenSeesSP on my laptop, and I'm glad to find your post here. I will appreciate your help. Thank you.

James
https://essayschief.com

deniswilsonmba
Posts: 1
Joined: Thu Jul 25, 2019 9:19 pm

Re: Windows 10

Post by deniswilsonmba » Thu Jul 25, 2019 9:22 pm

thanks for sharing such key with us

jishuaiwang
Posts: 8
Joined: Sat Apr 04, 2020 5:29 pm

Re: Windows 10

Post by jishuaiwang » Tue Apr 28, 2020 9:31 pm

i have the same problem with you, could you tell me how to sovle it?

mishabak
Posts: 1
Joined: Sat Feb 17, 2024 2:12 am
Location: India,Assam
Contact:

Re: Windows 10

Post by mishabak » Mon Mar 11, 2024 9:01 pm

my issue is resolved

Post Reply