joint 2D element

If you have a script you think might be useful to others post it
here. Hopefully we will be able to get the most useful of these incorporated in the manuals.

Moderators: silvia, selimgunay, Moderators

Post Reply
sattar
Posts: 8
Joined: Thu Apr 15, 2010 3:11 pm
Location: University of Colorado-Boulder

joint 2D element

Post by sattar » Mon Apr 19, 2010 9:57 am

Hi,
I have an RC frame model which works properly in opensees 1.6.2.e. When I run my model in opensees 2.2, 2.1,1.7.3, it gives me the following error message "Domain::addMP_Constraint - cannot add as constraint with tag10already exists in modelJoint2D::addMP_Joint - WARNING could not add equalDOF MP_Constraint to domain WARNING Joint2D::Joint2D(): can not generate ForJoint MP at node 1 ".
Do I need to change anything in my model regarding joint 2D element?

fmk
Site Admin
Posts: 5866
Joined: Fri Jun 11, 2004 2:33 pm
Location: UC Berkeley
Contact:

Post by fmk » Mon May 17, 2010 1:00 pm

2.2.1 will fix the error.

leekawansky
Posts: 2
Joined: Tue Jul 27, 2010 3:39 am
Location: St.Luis
Contact:

Post by leekawansky » Tue Jul 27, 2010 3:43 am

Yeah try 2.21, I had the same error, and it made it gone :)

hmahdavi
Posts: 1
Joined: Wed Oct 17, 2018 11:05 pm
Contact:

Re: joint 2D element

Post by hmahdavi » Wed Oct 17, 2018 11:18 pm

I had the same error, and it made it gone
http://market-digital.ir/

ikarsoo
Posts: 1
Joined: Thu Oct 25, 2018 11:13 am
Contact:

Re: joint 2D element

Post by ikarsoo » Thu Oct 25, 2018 11:18 am

I had the same error, and it made it gone
آموزش طراحی سایت با وردپرس
راحت ترین راه ساخت سایت با وردپرس می باشد.
اموزش ساخت سایت با وردپرس

Post Reply