Not able to find corresponding commands in the webpage

For posts concerning the documentation, errors, ommissions, general comments, etc.

Moderators: silvia, selimgunay, Moderators

Post Reply
wuhaoshrek
Posts: 122
Joined: Tue Oct 28, 2008 4:01 am

Not able to find corresponding commands in the webpage

Post by wuhaoshrek » Fri May 03, 2013 12:33 pm

Hi fmk,

I found the command listed on the OpenSees webpage is not including some commands which are
also quite useful, such as: unbalanceIncludingInertia recorder, strainUniaxialTest, and may be more.

I was wondering how I could find these options not appeared on the wiki but actually being included
in the OpenSees code, so i can find more commands useful.

Thanks.

fmk
Site Admin
Posts: 5883
Joined: Fri Jun 11, 2004 2:33 pm
Location: UC Berkeley
Contact:

Re: Not able to find corresponding commands in the webpage

Post by fmk » Mon May 06, 2013 9:18 am

at the comement, the only way to find these additional commands is through the source code. the commmands are added typically in 2 file directories, OpenSees/SRC/tcl and OpeNSees/SRC/modelbuilder/tcl

medhead
Posts: 1
Joined: Tue Jan 20, 2015 8:03 pm

Re: Not able to find corresponding commands in the webpage

Post by medhead » Wed Jan 21, 2015 6:51 pm

I was having the same problem and this helped me out. Thanks.
California truck driving schools made me who I am today.

Post Reply