Help!! How to build the model of FRP?

For posts concerning the documentation, errors, ommissions, general comments, etc.

Moderators: silvia, selimgunay, Moderators

Post Reply
andy0071
Posts: 18
Joined: Sat Feb 26, 2011 11:22 pm
Location: SYjianzhu university

Help!! How to build the model of FRP?

Post by andy0071 » Wed Oct 12, 2011 8:28 am

I wander to build the material model of FRP, but the material of FRP is not as same as steel which could keep the stress after the elastic transformation into plasticity. the FRP material will break and quit after it reach the ultimate load, so the curve will come down after the elastic transformation but not go horizontal.
That means could not use the "uniaxialMaterial ElasticPP" to model the FRP written as"uniaxialMaterial ElasticPP $IDfrp $Ef $ef 0"
BUt how to simulate the FRP's break after it reaches the ultimate load in OpenSees with basic material and Parallel material ??

~~~~(>_<)~~~~
Top
andy0071
Posts: 18
Joined: Sat Feb 26, 2011 11:22 pm
Location: SYjianzhu university

Re: Help!! How to build the model of FRP?

Post by andy0071 » Mon Nov 07, 2011 6:30 am

11
Last edited by andy0071 on Thu Jan 14, 2016 5:21 pm, edited 1 time in total.
Top
of84
Posts: 1
Joined: Wed Dec 21, 2011 4:28 am

Re: Help!! How to build the model of FRP?

Post by of84 » Wed Dec 21, 2011 4:33 am

Thanks, I was after the same answer! I'm impressed you answered your own question though! It's always the way!

Thanks again!

----------------------------------
North Face Backpacks - http://www.authenbag.com
Top
azim_gholinezhad
Posts: 1
Joined: Tue May 03, 2011 8:54 pm
Location: USB

Re: Help!! How to build the model of FRP?

Post by azim_gholinezhad » Tue Jan 03, 2012 9:40 am

dear andy0071,
I have the same problem. If you have the example script for FRP modeling could you please mail it to me.
I want to investigate the FRP thickness and number of layers and I can't find it in "confinedconcrete01" :(
Thank you in advance,
Top
mlagiou
Posts: 2
Joined: Sun Apr 05, 2009 7:35 am
Location: TECHNICAL UNIVERSITY CRETE

Re: Help!! How to build the model of FRP?

Post by mlagiou » Mon Jan 23, 2012 9:44 am

Deae andy0071

I was also trying to find out what to do about it!Thanks a lot!Still having problems with ConfinedConcrete01 material for concrete confinement!
Thanks again
Top
mattroidena1
Posts: 11
Joined: Thu Aug 16, 2012 10:54 pm
Location: National Taiwan University

Re: Help!! How to build the model of FRP?

Post by mattroidena1 » Wed Jan 23, 2013 7:06 am

Dear andy0071,
I have some troubles in my research like what you have here. I wonder that could I have your tcl file for this problem ?
If it's ok, could you send to me through email :ductuandhxd@gmail.com
I will deeply appreciate it. Thank you in advance!
Top
rywuandrew
Posts: 2
Joined: Sat May 03, 2014 7:29 pm
Location: University of Utah

Re: Help!! How to build the model of FRP?

Post by rywuandrew » Wed Feb 18, 2015 8:11 pm

Hi Friends,

Did you solve this problem? I have the same problem with you now. If possible, I hope you can tell me how did you make it. Thank you so much. I really appreciated your help. My email rywuandrew@gmail.com

Andrew
Top
rywuandrew
Posts: 2
Joined: Sat May 03, 2014 7:29 pm
Location: University of Utah

Re: Help!! How to build the model of FRP?

Post by rywuandrew » Wed Feb 18, 2015 8:19 pm

azim_gholinezhad wrote:
> dear andy0071,
> I have the same problem. If you have the example script for FRP modeling
> could you please mail it to me.
> I want to investigate the FRP thickness and number of layers and I can't
> find it in "confinedconcrete01" :(
> Thank you in advance,

I also want to investigate the FRP thickness and number of layer, did you solve it? If so, can you offer me some help? Thank you so much for your help.
Andrew. My email is rywuandrew@gmail.com
Top
Post Reply

Return to “Documentation”