warning

For posts concerning the documentation, errors, ommissions, general comments, etc.

Moderators: silvia, selimgunay, Moderators

Post Reply
ec08076
Posts: 4
Joined: Thu Mar 25, 2010 8:44 am
Location: FEUP

warning

Post by ec08076 » Tue May 11, 2010 6:13 am

Hello i'm having a problem when i run a model
it appear this warning

WARNING BandGenLinLapackSolver::solve() -LAPACK routine returned 1

Can you help me?

i´ll be waiting some help

fmk
Site Admin
Posts: 5866
Joined: Fri Jun 11, 2004 2:33 pm
Location: UC Berkeley
Contact:

Post by fmk » Mon May 17, 2010 1:02 pm

it means your system is singular .. unless you goofed in your material definitions and node numbering, add more boundary conditions

wdylut
Posts: 13
Joined: Tue May 08, 2012 5:02 pm
Location: lut

Re: warning

Post by wdylut » Tue Jun 12, 2012 7:09 pm

I also met such a problem , my problem is showed blow:
WARNING BandGenLinLapackSolver::solve() -LAPACK routine returned 6
could you tell me where it is?

fmk
Site Admin
Posts: 5866
Joined: Fri Jun 11, 2004 2:33 pm
Location: UC Berkeley
Contact:

Re: warning

Post by fmk » Wed Jun 13, 2012 2:39 pm

your solver is failing. if it is occuring during the analysis your problem is ging nonlinear and you have a 0 stifness, if at the start your model is incorrect due to incorrect material args or boundary conditions.

SunnyPark
Posts: 9
Joined: Mon Feb 14, 2011 12:21 am

Re: warning

Post by SunnyPark » Wed Jun 13, 2012 9:05 pm

If it occuring during the analysis, how to correct "0 stiffness" ????????????

Post Reply