PySimple1 (didn't work)

For posts concerning the documentation, errors, ommissions, general comments, etc.

Moderators: silvia, selimgunay, Moderators

Post Reply
Jose Leo

PySimple1 (didn't work)

Post by Jose Leo » Tue Nov 23, 2004 4:03 am

uniaxialMaterial PySimple1 command don't work... some arguments in the syntax may be missing (i.e. soilType = 1 or 2)

this type of error is always generated when evaluating the command;
WARNING SNAP material model could not be created

Boris
Posts: 95
Joined: Mon Jun 14, 2004 3:57 pm
Location: UC Davis

Post by Boris » Sun Nov 28, 2004 10:43 am

Can you post your input file of email it to me...

Thanks, Boris

jeremic@ucdavis.edu

vsuarez
Posts: 5
Joined: Mon Jan 10, 2005 8:51 am
Location: NCSU

I need help with PySimple1.

Post by vsuarez » Mon Jan 10, 2005 9:04 am

Jose,

Did you find out how to make PySimple1 work?

I have the same problem now, so I would really appreciate your help.

Thanks,

fmk
Site Admin
Posts: 5883
Joined: Fri Jun 11, 2004 2:33 pm
Location: UC Berkeley
Contact:

Post by fmk » Fri Jan 14, 2005 4:18 pm

should be working now .. download latest .exe from the website .. should say version 1.6.1.d (or greater!) when run.

Post Reply