error in run anlysis

Forum for OpenSees users to post questions, comments, etc. on the use of the OpenSees interpreter, OpenSees.exe

Moderators: silvia, selimgunay, Moderators

Post Reply
AhmedFawzy
Posts: 1
Joined: Sun Sep 03, 2023 11:23 am

error in run anlysis

Post by AhmedFawzy » Sun Oct 01, 2023 2:39 pm

i use the opensees navigator from MATLAB i set path for opensees exe i downloaded from site when i finish the model and run analysis i have this message

OpenSees -- Open System For Earthquake Engineering Simulation
Pacific Earthquake Engineering Research Center
Version 3.2.2 64-Bit

(c) Copyright 1999-2016 The Regents of the University of California
All Rights Reserved
(Copyright and Disclaimer @ http://www.berkeley.edu/OpenSees/copyright.html)


===============================================================================
OpenSees Navigator: Version 2.6.0
File sourced: E:/PHD/point of phd/13-opensees navigator trials/01-truss example/TrussExample/TrussExample.tcl
couldn't read file "E:/PHD/point of phd/06-opensees source install/OpenSees3.2.2-x64.exe/OpenSees3.2.2-x64.exe/lib/tcl8.6/clock.tcl": no such file or directory
while executing
"source -encoding utf-8 [file join $TclLibDir clock.tcl]"
(procedure "::tcl::clock::format" line 3)
invoked from within
"clock format $systemTime -format "%d-%b-%Y %H:%M:%S""
invoked from within
"puts "Starting OpenSees analysis: [clock format $systemTime -format "%d-%b-%Y %H:%M:%S"]" "
(file "TrussExample.tcl" line 8)

Post Reply