Error message from example "Dynamic Analysis of 2-Story Moment Frame"

Forum for OpenSees users to post questions, comments, etc. on the use of the OpenSees interpreter, OpenSees.exe

Moderators: silvia, selimgunay, Moderators

Post Reply
suuzie
Posts: 9
Joined: Tue Jun 13, 2017 3:51 pm
Location: SUNY Buffalo

Error message from example "Dynamic Analysis of 2-Story Moment Frame"

Post by suuzie » Wed Sep 01, 2021 10:17 am

Hi,

Can you tell me what is the meaning of the error message that I get from the example "Dynamic Analysis of 2-Story Moment Frame" (on OpenSees Wiki page)? When I source the .tcl file, I get the following message:
WARNING: analysis .. TransientAnalysis already exists => wipeAnalysis not invoked, problems may arise
The example is from the following website:
https://opensees.berkeley.edu/wiki/inde ... ment_Frame

It seems when I remove the "Eigenvalue Analysis" section, the above error message does not appear.. I am using OpenSees with version 3.3.0 64-Bit.

semkp
Posts: 1
Joined: Mon Mar 11, 2024 12:32 am

Re: Error message from example "Dynamic Analysis of 2-Story Moment Frame"

Post by semkp » Mon Mar 11, 2024 12:40 am

Hi, I am also getting the same warning while running the OpenSees Example 8. generic 3D Frame (https://opensees.berkeley.edu/wiki/inde ... _W-Section). Please let me know if you have found a solution for this.
Thank you.

mhscott
Posts: 868
Joined: Tue Jul 06, 2004 3:38 pm
Location: Corvallis, Oregon USA
Contact:

Re: Error message from example "Dynamic Analysis of 2-Story Moment Frame"

Post by mhscott » Mon Mar 11, 2024 4:48 am

You can ignore that warning

Post Reply