I am trying to STKO's new diagram plot feature, so I just built a fixed beam to test the results. But when I fix all DOFs of node 1 and node 2, the OpenSees can not output any results. Does anyone know how to deal with it?
fix 1 1 1 1 1 1 1;
fix 2 1 1 1 1 1 1;
Simple fixed beam question
Moderators: silvia, selimgunay, Moderators
-
gooddaytogo
- Posts: 23
- Joined: Fri Mar 01, 2019 7:15 pm
- Location: Texas Tech University
Re: Simple fixed beam question
Hi,
I am not sure about STKO, but see if this helps.
https://portwooddigital.com/2020/08/27/ ... -marplots/
This is a article written by Prof. Scott.
I am not sure about STKO, but see if this helps.
https://portwooddigital.com/2020/08/27/ ... -marplots/
This is a article written by Prof. Scott.
-
selimgunay
- Posts: 913
- Joined: Mon Sep 09, 2013 8:50 pm
- Location: University of California, Berkeley
Re: Simple fixed beam question
Do you have any distributed loads on your beam?
-
gooddaytogo
- Posts: 23
- Joined: Fri Mar 01, 2019 7:15 pm
- Location: Texas Tech University
Re: Simple fixed beam question
Thanks, it is very helpful.Ashok wrote: ↑Sat Nov 28, 2020 5:47 pmHi,
I am not sure about STKO, but see if this helps.
https://portwooddigital.com/2020/08/27/ ... -marplots/
This is a article written by Prof. Scott.