Opensees ==> Matlab ==> Opensees

Forum for OpenSees users to post questions, comments, etc. on the use of the OpenSees interpreter, OpenSees.exe

Moderators: silvia, selimgunay, Moderators

Post Reply
NimaFa
Posts: 2
Joined: Thu Nov 05, 2020 11:43 pm

Opensees ==> Matlab ==> Opensees

Post by NimaFa » Wed Nov 11, 2020 12:21 am

Hi
I hope you are doing well. I am programming a model in Opensees, and I want to use a defined-material-behavior code in Matlab.

The procedure is :
Opensees (model, node, mass) ===> Matlab (material behavior) ====> Opensees (section, element, ....) ====> Matlab (plotting output)

Is it possible ?
Top
mhscott
Posts: 874
Joined: Tue Jul 06, 2004 3:38 pm
Location: Corvallis, Oregon USA
Contact:
Contact mhscott

Re: Opensees ==> Matlab ==> Opensees

Post by mhscott » Wed Nov 11, 2020 7:32 pm

Use OpenSeesPy :)
Top
selimgunay
Posts: 913
Joined: Mon Sep 09, 2013 8:50 pm
Location: University of California, Berkeley

Re: Opensees ==> Matlab ==> Opensees

Post by selimgunay » Mon Nov 16, 2020 11:46 pm

You can run OpenSees from Matlab.
Top
Post Reply

Return to “OpenSees.exe Users”