RigidLink command

Forum for OpenSees users to post questions, comments, etc. on the use of the OpenSees interpreter, OpenSees.exe

Moderators: silvia, selimgunay, Moderators

Post Reply
mohammmad
Posts: 45
Joined: Tue Aug 21, 2018 4:10 am
Contact:

RigidLink command

Post by mohammmad » Sat Oct 10, 2020 11:28 am

Hello,
It was previously mentioned on the page related to RigidLink command that thatrigidLink -beam enforces beam kinematics (translation and rotation) over the length between two nodes.
Why this note is eliminated!!!!?
https://opensees.berkeley.edu/wiki/inde ... nk_command
This page was last edited on 13 June 2020, at 15:45

selimgunay
Posts: 913
Joined: Mon Sep 09, 2013 8:50 pm
Location: University of California, Berkeley

Re: RigidLink command

Post by selimgunay » Mon Oct 12, 2020 10:42 am

You can still use it according to your purposes.

Post Reply