PDMY03

Forum for OpenSees users to post questions, comments, etc. on the use of the OpenSees interpreter, OpenSees.exe

Moderators: silvia, selimgunay, Moderators

Post Reply
maryammf
Posts: 47
Joined: Mon Oct 24, 2016 12:37 pm
Location: Istanbul Technical University

PDMY03

Post by maryammf » Fri Sep 18, 2020 10:50 am

Hi everyone,

PDMY03 model (PressureDependMultiYield03) is not working while running OpenSees and I have the warning of not being able to create this material model.
I will appreciate any idea about this case.

Thanks!

mhscott
Posts: 586
Joined: Tue Jul 06, 2004 3:38 pm
Location: Corvallis, Oregon USA
Contact:

Re: PDMY03

Post by mhscott » Fri Sep 18, 2020 3:14 pm

Can you post the input command you use and the error you receive?

maryammf
Posts: 47
Joined: Mon Oct 24, 2016 12:37 pm
Location: Istanbul Technical University

Re: PDMY03

Post by maryammf » Sun Sep 20, 2020 3:11 pm

Hi,

Here is the command as defined in the website: https://opensees.berkeley.edu/wiki/inde ... mentdriver

nDMaterial PressureDependMultiYield03 $matTag 2 $massDen $refG $refB $frinctionAng \
$peakShearStrain $refPress $pressDependCoe $phaseTransAng \
0 $contraction_a $contraction_b $contraction_c $contraction_d $contraction_e \
$dilation_a $dilation_b $dilation_c \
$noYieldSurf $liquefac1 $liquefac2 \
$pa $S0;

And this is the warning I receive while running:
WARNING could not create nDMaterial: PressureDependMultiYield03

Thanks!

Post Reply