LAYERED SHELL ELEMENT

Forum for OpenSees users to post questions, comments, etc. on the use of the OpenSees interpreter, OpenSees.exe

Moderators: silvia, selimgunay, Moderators

Post Reply
NALLAGATLABHAGYASREE
Posts: 9
Joined: Sat May 25, 2019 1:50 am
Location: Indian Institute of Technology Hyderabad

LAYERED SHELL ELEMENT

Post by NALLAGATLABHAGYASREE » Sun Mar 08, 2020 9:00 pm

Can I use Layered shell elements for modelling the dome structures?
I need to model Reinforced concrete dome structure, can someone suggest me the element type?
Top
vpapanik
Posts: 36
Joined: Tue Jun 15, 2010 12:53 am
Location: Thessaloniki
Contact:
Contact vpapanik

Re: LAYERED SHELL ELEMENT

Post by vpapanik » Sun Mar 15, 2020 7:35 am

layeredshell section + shell elements works fine
Top
Prafullamalla
Posts: 160
Joined: Mon Feb 02, 2015 6:32 pm

Re: LAYERED SHELL ELEMENT

Post by Prafullamalla » Wed Mar 18, 2020 8:48 am

the concrete material for layered shell element has problem specially after yield load. I faced the problem when I was working shear wall model with shell elemnt
Prafulla Malla, Nepal
Praf_malla@hotmail.com
Top
Post Reply

Return to “OpenSees.exe Users”