problems Modified Ibarra-Medina-Krawinkler

Forum for OpenSees users to post questions, comments, etc. on the use of the OpenSees interpreter, OpenSees.exe

Moderators: silvia, selimgunay, Moderators

Post Reply
kcorproro
Posts: 17
Joined: Sat Apr 04, 2015 11:12 pm
Location: utfsm

problems Modified Ibarra-Medina-Krawinkler

Post by kcorproro »

hi, when I apply in the spring uniaxialMaterial ModIMKPeakOriented material I do not have problem, but I aplly Modified Ibarra-Medina with Pinched Hysteretic Response the solution fail.
Why ? If it is the same paremeters.
the material with pinching is ok?
thanks you
Post Reply