How to model the special shaped column

Forum for OpenSees users to post questions, comments, etc. on the use of the OpenSees interpreter, OpenSees.exe

Moderators: silvia, selimgunay, Moderators

Post Reply
JunLi
Posts: 5
Joined: Fri Jun 18, 2004 1:34 am
Location: China

How to model the special shaped column

Post by JunLi » Mon Mar 14, 2005 5:39 am

Hi,everyone

How to model special shaped columns such as the T-shaped one in OpenSEES?

Thanks a lot!

Regards.
Jun Li, M.S Candidate
Earthquake Engineering Research Division
School of Civil & Hydraulic Engineering
Dalian University of Technology
Dalian, 116024
China
Top
fmk
Site Admin
Posts: 5883
Joined: Fri Jun 11, 2004 2:33 pm
Location: UC Berkeley
Contact:
Contact fmk

Post by fmk » Mon Mar 14, 2005 11:51 am

you a bunch of patch commands .. similar in idea to Example3.1 .. here we have core and cover areas seperatly defined using patches.
Top
JunLi
Posts: 5
Joined: Fri Jun 18, 2004 1:34 am
Location: China

Post by JunLi » Mon Mar 14, 2005 8:43 pm

much appreciate!
Jun Li, M.S Candidate
Earthquake Engineering Research Division
School of Civil & Hydraulic Engineering
Dalian University of Technology
Dalian, 116024
China
Top
Post Reply

Return to “OpenSees.exe Users”