bridge girders considering moment–shear interaction

A place to ask questions on how to use OpenSees to perform Finite Element Reliability Analysis

Moderators: silvia, selimgunay, mhscott, Moderators

Post Reply
leeee
Posts: 2
Joined: Sun May 31, 2020 6:27 pm

bridge girders considering moment–shear interaction

Post by leeee » Tue Jun 02, 2020 11:34 pm

Lately I've been working on this article on ''Finite element reliability analysis of bridge girders considering
moment–shear interaction
'',response sensitivity has been applied in the reliability analysis of continuous bridge
girders subjected to moving loads. I was hoping to get some examples of procedures to research.I was hoping to get some examples of procedures to research.I sincerely hope that the professor will get back to me.
Thanks

selimgunay
Posts: 913
Joined: Mon Sep 09, 2013 8:50 pm
Location: University of California, Berkeley

Re: bridge girders considering moment–shear interaction

Post by selimgunay » Fri Jun 05, 2020 2:34 pm

I would recommend emailing the authors of the paper that you mentioned directly.

Post Reply