I found a bug about sensitivity in the latest version 2.5

A place to ask questions on how to use OpenSees to perform Finite Element Reliability Analysis

Moderators: silvia, selimgunay, mhscott, Moderators

Post Reply
Random
Posts: 7
Joined: Thu Sep 22, 2016 4:58 am
Location: Huazhong University of Science and Technology
Contact:

I found a bug about sensitivity in the latest version 2.5

Post by Random » Thu Nov 22, 2018 6:30 pm

Dear mhscott,
In the sensitivity example , 2D RC frame subjected to earthquake base excitation (http://opensees.berkeley.edu/wiki/index ... excitation), If I used the opensees version 2.5, the sensitivity result of parameter fc,fu will be far different with the result by the version 2.4.6 (or earlier version). And from the result, I can tell that the result of 2.5 is not right . I use the FFD method to verify.
Another interesting thing is that if I calculate one parameter sensitivity like only fc in version 2.5, I would get the same answer with other version.
If anyone who ever had this problem, please tell me, thanks.

Post Reply