FORM of 2D RC frame

A place to ask questions on how to use OpenSees to perform Finite Element Reliability Analysis

Moderators: silvia, selimgunay, mhscott, Moderators

Post Reply
amadeus
Posts: 4
Joined: Fri Mar 08, 2013 6:03 pm
Location: The Hong Kong Polytechnic University

FORM of 2D RC frame

Post by amadeus » Mon Oct 14, 2013 8:03 am

Dear Scott,

I would like to conduct a FORM analysis of the 2D RC frame given in http://opensees.berkeley.edu/wiki/index ... excitation. All the eight gradient parameters have been assigned with normal distributed random variables. There are two problems in my analysis:
1) how can i conduct a static pushover reliability simulation as in the paper "OpenSees-SNOPT Framework for Finite-Element-Based Optimization of Structural and Geotechnical Systems" (Gu et al. 2012). When i tried to continue the sensitivity study in example3_input.tcl, I found that "integrator LoadControl" cannot give convergent results. If i switched to use "integrator DisplacementControl", the simulation would not stop at the loading defined in the load pattern. Instead, it could only stop when the controlling displacement has been reached, which would make the displacement-based performance function meaningless. How can I solve this problem?
2) how could i get the time history of reliability indices of the frame, if time series have been given as load pattern. It seems that "runFORMAnalysis" can only give one single reliability index, which is, in my opinion, corresponding to the reliability index at the end of the dynamic analysis.

Thanks a lot!
David

mhscott
Posts: 872
Joined: Tue Jul 06, 2004 3:38 pm
Location: Corvallis, Oregon USA
Contact:

Re: FORM of 2D RC frame

Post by mhscott » Mon Oct 14, 2013 1:30 pm

> 1) how can i conduct a static pushover reliability simulation as in the paper "OpenSees-SNOPT
> Framework for Finite-Element-Based Optimization of Structural and Geotechnical Systems"
> (Gu et al. 2012). When i tried to continue the sensitivity study in example3_input.tcl,
> I found that "integrator LoadControl" cannot give convergent results. If i switched
> to use "integrator DisplacementControl", the simulation would not stop at the loading
> defined in the load pattern. Instead, it could only stop when the controlling displacement
> has been reached, which would make the displacement-based performance function meaningless.
> How can I solve this problem?

I'm not familiar with the examples in the paper you mention, but you are correct, a displacement controlled solution will give meaningless results when the performance function is defined in terms of the nodal displacement that is controlled. Can you instead define a performance function in terms of an internal section force when using displacement control for the analysis?

> 2) how could i get the time history of reliability indices of the frame, if time
> series have been given as load pattern. It seems that "runFORMAnalysis" can only
> give one single reliability index, which is, in my opinion, corresponding to the
> reliability index at the end of the dynamic analysis.

You can do a FORM analysis inside an analysis loop and dump the results to unique output files named by the loop variable, e.g., $i shown below

for {set i 1} {$i <= $numSteps} {incr i} {
analyze 1 $dt
runFORMAnalysis output$i.out
}

*However*, path-dependency is a real problem here, as the FORM analysis at one time step will not be consistent with that at a subsequent time step when materials yield and changes states. You should really do a full time history analysis ending with a FORM analysis for each time step.

Time step 1 - analyze, run FORM
reset
Time step 2 - analyze, analyze, run FORM
reset
Time step 3 - analyze, analyze, analyze, run FORM
reset
......

This can easily be accomplished with nested loops, but will require much more computational time. It would be interesting to compare this approach with the results from doing FORM at every time step.

Gerasetesu
Posts: 3
Joined: Wed Apr 06, 2011 8:59 am
Location: Germany
Contact:

дешевый ремонт холодильников либхер

Post by Gerasetesu » Fri Jul 24, 2015 6:56 am

Классный выездной сотрудник по морозильникам за спасибо прокачает и выполнит [url=http://www.xolodremont.ru/remont_holodi ... bherr.html]дешевый ремонт холодильников либхер[/url] без задержки на дому с квитанцией на всевозможные запасные части.Ознакомиться и скачать листы цен вы можете у нас на сайте http://www.xolodremont.ru/













------------------------
походный [url=http://xn--d1aba1aegnp7a.com/forum/view ... 200#p94200]дешевый ремонт холодильников Автозаводская[/url]
для людей
весовой [url=http://www.baby-on.net/forum/profile.ph ... le&u=31746]дешевый ремонт холодильников Орехово[/url]
с мыслью
скромный [url=http://kidneykorner.com/biuletynbord/in ... 53.new#new]дешевый ремонт холодильников Театральная[/url]
бегом

Gerasetesu
Posts: 3
Joined: Wed Apr 06, 2011 8:59 am
Location: Germany
Contact:

дешевый ремонт холодильников либхер

Post by Gerasetesu » Fri Jul 24, 2015 6:58 am

Молчаливый московский холодильщик по охлаждающим системам за недорого обследует и осуществит [url=http://www.xolodremont.ru/remont_holodi ... bherr.html]дешевый ремонт холодильников либхер[/url] мгновенно в организации и на дому гарантированно на любые узлы.Ознакомиться и скачать все цены вы можете у нас на сайте http://www.xolodremont.ru/













------------------------
простой [url=http://by-downloads.ucoz.net/index/8-20480]дешевый ремонт холодильников Бирюса[/url]
всегда рядом
жаркий [url=http://warezzz.ucoz.net/index/8-12303]дешевый ремонт холодильников Юго-Западная[/url]
утречком
рисованный [url=http://eskisehirakvaryum.com/forum/inde ... 03.new#new]дешевый ремонт холодильников Речной Вокзал[/url]
для всех

Gerasetesu
Posts: 3
Joined: Wed Apr 06, 2011 8:59 am
Location: Germany
Contact:

дешевый ремонт холодильников либхер

Post by Gerasetesu » Fri Jul 24, 2015 7:01 am

Разговорчивый холодильщик по морозильным установкам за недорого приготовит и выполнит [url=http://www.xolodremont.ru/remont_holodi ... bherr.html]дешевый ремонт холодильников либхер[/url] быстро в пятиэтажке с гарантией на всевозможные ремонты.Прочитать и распечатать все прайсы вы можете у нас на сайте http://www.xolodremont.ru/













------------------------
весовой [url=http://www.baby-on.net/forum/profile.ph ... le&u=31746]дешевый ремонт холодильников Соколиная гора[/url]
без заслона
ситевой [url=http://oka-tlt.ucoz.ru/index/8-12856]дешевый ремонт холодильников Аристон[/url]
с почетом
округлый [url=http://orel-tm.3dn.ru/index/8-22032]дешевый ремонт холодильников Беко[/url]
пешком

Post Reply