The OpenSees Community

Hi run the example of Ex2c.Canti2D.InelasticFiberSection.EQ, I plot the hysteretic curve with the base shear and and the displacement at the deck level,but the hysteresis loop looks like a line ,it doesn't look like the usually hysteresis loop i saw in many publications. can you tell me what's wrong...

hello Fame
wish you to see my message .
my hysteresis loop looks like unusual,i don't know what is the matter with the model of bridge column , please give me some advice ,thank you!

best wishes

hello Fame
i meet the same problem,how did you do that? please give me some advice thank you!

Fame wrote:
> I solve my problem.
> Thanks

hello,everyone!
there are many hysteretic models in opensees,and the hysteretic models usually define by the class of materials ,which order is define the hysteretic models ? may be should i define a hysteretic material at first?
best wish.

i meet the same problem,and the code stop running at the time which is ont the ground motion end time. > Hi > Here is a part of the warning message about convergence problems that I have due to > time history analysis: > > OpenSees > analyze failed, returned: -3 error flag > WARNING: CTestEnergyIncr...

to fmk thank you very much .when i check out the results and encountered a problem . there are two recorder of support reaction in my code ,one is " recorder Node -file ida/reaction1.out -time -node 1 -dof 1 2 3 reaction ",the other is " recorder Element -file x[expr $gmf]/ztele_1.out -time -ele 1 g...

to fmk : i have an question about reyleigh damping factors,most exeamples show that the value of $betaKcurr and $betaKinit is 0,so i want to know how to define $betaKcurr and $betaKinit ,and What is the difference in using the $betaKcurr ,$betaKinit and $betaKcomm. fmk wrote: > the second analysis s...

to fmk: thanks,i move the loop to the start of the code ,the result is equal. fmk wrote: > the second analysis starts at the end of the first. if you want each to > start from 0 with the model at the initial state you need to move the for > loop to the start of the file and put in a wipe.

HE,ELi run the code ,i found that the result is different when i=100 and i=1 under the same Factor . Eli wrote: > in the following i use while too. but when roof displacement hits 0.5 m; the analysis > do not break and continue, and after it gets error: the ConvergenceTest object > failed in test. >...

hi ,i wrote the code of IDA,i meet two problem ,1) in the loop , when $i=2 the ground start time is 28.01,but it should be 0.01; 2) the root displacement is different the $gmf=2.998 which wipe the loop, can you tell me what's wrong with the code? #“IDA CODE” #Units: N,m .Kg #Define model builder fil...

hello! I have been learnt paper,which is "Multiple Support Response Spectrum Analysis Of Bridges Including The Site-Response Effect and The MSRS code",and I am interesting MSRS code.So I look it for online,unfortunately, I found a connection but can not download software． The link is 'http://nisee.b...

to fmk: thanks so much! the answer is very detailed. there are a number of main subdirectories under OpenSees/SRC 1. Analysis - all classes associated with analysis are here 2. Element - all element types are under here 3. Material - all material types under here 4. Domain - all classes associated t...

thanks so much. I have been downloaded the code ,but the code has been divided into many parts,i don't know the part which is use for computing or simulation,would you please tell me ? thanks for your time ! go to the developer pages on the website. The last few releases of OpenSees can be downloade...

thanks so much !

Structural1 wrote:Here:

http://opensees.berkeley.edu/OpenSees/d ... wnload.php

hello!
how and where can i downlode the opensees source code?


thankes for your attention!