hi all, i have problem making the construction stage
i use the OpenSees navigator from MATLAB
in my case, i am modeling two span precast beam bridge with a continuous slab so in our case, the beams will placed and deformed, then the continuous slab will be pored
so the slab shouldn't suffer from any deformation or straining action under deadload
and that is the reason for me need to make staged construction
if any one can help me and tell me how to perform that,
that will be great
thanks in advance
Search found 2 matches
- Thu May 02, 2024 3:58 pm
- Forum: OpenSees.exe Users
- Topic: staged construction
- Replies: 0
- Views: 171
- Sun Oct 01, 2023 2:39 pm
- Forum: OpenSees.exe Users
- Topic: error in run anlysis
- Replies: 0
- Views: 74513
error in run anlysis
i use the opensees navigator from MATLAB i set path for opensees exe i downloaded from site when i finish the model and run analysis i have this message
OpenSees -- Open System For Earthquake Engineering Simulation
Pacific Earthquake Engineering Research Center
Version 3.2.2 64-Bit
(c) Copyright 1999-2016 The Regents of the University of California
All Rights Reserved
(Copyright and Disclaimer @ http://www.berkeley.edu/OpenSees/copyright.html)
===============================================================================
OpenSees Navigator: Version 2.6.0
File sourced: E:/PHD/point of phd/13-opensees navigator trials/01-truss example/TrussExample/TrussExample.tcl
couldn't read file "E:/PHD/point of phd/06-opensees source install/OpenSees3.2.2-x64.exe/OpenSees3.2.2-x64.exe/lib/tcl8.6/clock.tcl": no such file or directory
while executing
"source -encoding utf-8 [file join $TclLibDir clock.tcl]"
(procedure "::tcl::format" line 3)
invoked from within
"clock format $systemTime -format "%d-%b-%Y %H:%M:%S""
invoked from within
"puts "Starting OpenSees analysis: [clock format $systemTime -format "%d-%b-%Y %H:%M:%S"]" "
(file "TrussExample.tcl" line
OpenSees -- Open System For Earthquake Engineering Simulation
Pacific Earthquake Engineering Research Center
Version 3.2.2 64-Bit
(c) Copyright 1999-2016 The Regents of the University of California
All Rights Reserved
(Copyright and Disclaimer @ http://www.berkeley.edu/OpenSees/copyright.html)
===============================================================================
OpenSees Navigator: Version 2.6.0
File sourced: E:/PHD/point of phd/13-opensees navigator trials/01-truss example/TrussExample/TrussExample.tcl
couldn't read file "E:/PHD/point of phd/06-opensees source install/OpenSees3.2.2-x64.exe/OpenSees3.2.2-x64.exe/lib/tcl8.6/clock.tcl": no such file or directory
while executing
"source -encoding utf-8 [file join $TclLibDir clock.tcl]"
(procedure "::tcl::format" line 3)
invoked from within
"clock format $systemTime -format "%d-%b-%Y %H:%M:%S""
invoked from within
"puts "Starting OpenSees analysis: [clock format $systemTime -format "%d-%b-%Y %H:%M:%S"]" "
(file "TrussExample.tcl" line