The OpenSees Community

the results of analysis were analyzed successfully, but the output contents in 06.txt and 16.txt were showed with 0.
the contents of jiazai.txt are as follows:
####
0
0
0
0
0.004
-0.004
0.004
0
-0.004
0

Why my opensees cannot read the file containing the load factors values correctly when I use it to do a quasi-static analysis of a column? The results after the run are empty?
Is it that the command not written right?
#timeSeries Path 1 -dt 0.1 -filePath jiazai.txt
Here is the modelling code for a certain column, but I cannot obtain a correct results:
#
model basic -ndm 2 -ndf 3

node 1 0 0
node 3 0 250
node 4 0 500
node 2 0 750


fix 1 1 1 1


uniaxialMaterial Concrete02 4 -29.39 -0.0025 -10.36 -0.015 0.1 2.8 3000
uniaxialMaterial Concrete02 3 -24.49 -0.002 -8.11 -0.005 0.1 2.4 3000
uniaxialMaterial Steel02 1 582 289850 0.0033 16 0.925 0.15

section Fiber 1 {
patch rect 4 8 8 -80 -80 80 80
patch rect 3 10 1 -100 80 100 100
patch rect 3 10 1 -100 -100 100 -80
patch rect 3 1 8 -100 -80 -80 80
patch rect 3 1 8 80 -80 100 80
layer straight 1 3 50.24 -80 80 80 80
layer straight 1 2 50.24 -80 0 80 0
layer straight 1 3 50.24 -80 -80 80 -80
}

geomTransf PDelta 1

element dispBeamColumn 1 1 3 3 1 1
element dispBeamColumn 2 3 4 3 1 1
element dispBeamColumn 3 4 2 3 1 1

recorder Node -file 06.txt -time -node 2 -dof 1 disp
recorder Node -file 16.txt -time -node 2 -dof 1 reaction

pattern Plain 1 Linear {
load 2 0 -140780 0
}

constraints Plain
numberer RCM
system BandGeneral
test NormDispIncr 1.0e-8 100 2
algorithm Newton
integrator LoadControl 1
analysis Static
analyze 1
loadConst 0.0

timeSeries Path 1 -dt 0.1 -filePath jiazai.txt

pattern Plain 2 1 {
sp 2 1 1
}

constraints Penalty 1e20 1e20
numberer RCM
system BandGeneral
test NormDispIncr 1.0e-8 1000 2
algorithm KrylovNewton
integrator LoadControl 0.1
analysis Static
analyze 4763
#