Search found 9 matches

by chicken
Tue Apr 13, 2021 1:16 am
Forum: OpenSees.exe Users
Topic: element zeroLengthSection-The moment curvature analysis cannot output the stress and strain of the fiber
Replies: 11
Views: 8743

Re: element zeroLengthSection-The moment curvature analysis cannot output the stress and strain of the fiber

The output you are getting is not bending moment but it is the pseudotime. There must be something wrong with your code due to which it is unable to record the stress and strain and you are only getting pseudotime as an output. Thank you for your reply. Could you please help me to see how to modify...
by chicken
Fri Apr 09, 2021 5:25 pm
Forum: OpenSees.exe Users
Topic: element zeroLengthSection-The moment curvature analysis cannot output the stress and strain of the fiber
Replies: 11
Views: 8743

Re: element zeroLengthSection-The moment curvature analysis cannot output the stress and strain of the fiber

Why do you have the 2 in '-ele 1 2 section...'? I think I know what you mean,Are you saying this should be the case, recorder Element -file Element1.out -time -ele 1 Section 1 fiber 5.6 4.8 strainstress I tried again, Element1.out still got the bending moment Rather than strainstress Can you help m...
by chicken
Fri Apr 09, 2021 5:14 pm
Forum: OpenSees.exe Users
Topic: element zeroLengthSection-The moment curvature analysis cannot output the stress and strain of the fiber
Replies: 11
Views: 8743

Re: element zeroLengthSection-The moment curvature analysis cannot output the stress and strain of the fiber

mhscott wrote:
Fri Apr 09, 2021 6:16 am
Why do you have the 2 in '-ele 1 2 section...'?
Thank you for your reply,I don't know what you mean, the one at the bottom is not my command stream,I only have one in '-ele 1 2 section...
by chicken
Fri Apr 09, 2021 5:12 pm
Forum: OpenSees.exe Users
Topic: element zeroLengthSection-The moment curvature analysis cannot output the stress and strain of the fiber
Replies: 11
Views: 8743

Re: element zeroLengthSection-The moment curvature analysis cannot output the stress and strain of the fiber

Thank you for your reply,I don't know what you mean, the one at the bottom is not my command stream,I only have one in '-ele 1 2 section...
by chicken
Fri Apr 09, 2021 12:00 am
Forum: OpenSees.exe Users
Topic: element zeroLengthSection-The moment curvature analysis cannot output the stress and strain of the fiber
Replies: 11
Views: 8743

element zeroLengthSection-The moment curvature analysis cannot output the stress and strain of the fiber

This is my code proc MomentCurvature {secTag axialLoad maxK {numIncr 100} } { # Define two nodes at (0,0) node 1 0.0 0.0 node 2 0.0 0.0 # Fix all degrees of freedom except axial and bending fix 1 1 1 1 fix 2 0 1 0 # Define element # tag ndI ndJ secTag element zeroLengthSection 1 1 2 $secTag # Create...
by chicken
Mon Dec 28, 2020 11:37 pm
Forum: OpenSees.exe Users
Topic: an pattern Plain and Pattern Multisupport not be used together?
Replies: 5
Views: 4467

Re: an pattern Plain and Pattern Multisupport not be used together?

mhscott wrote:
Fri Dec 11, 2020 5:13 am
You have patterns with the same tag. All patterns need to have unique tags.

You can find some resources at https://courses.silviasbrainery.com
thankyou for you reply thanyou xiexie
by chicken
Thu Dec 10, 2020 5:41 am
Forum: OpenSees.exe Users
Topic: I add pattern MultiSupport 1 and 3 to 260 point , add pattern MultiSupport 2 and 4 to 261 point, But ultimately only
Replies: 0
Views: 4448

I add pattern MultiSupport 1 and 3 to 260 point , add pattern MultiSupport 2 and 4 to 261 point, But ultimately only

I add pattern MultiSupport 1 and 3 to 260 point , add pattern MultiSupport 2 and 4 to 261 point, But ultimately only pattern MultiSupport 3 and 4 have impacts on the results Where is the problem? Looking forward to your reply This is part of my code: puts "Transient analysis" set xDamp 0.05; set nEi...
by chicken
Thu Dec 10, 2020 5:26 am
Forum: OpenSees.exe Users
Topic: an pattern Plain and Pattern Multisupport not be used together?
Replies: 5
Views: 4467

Re: an pattern Plain and Pattern Multisupport not be used together?

Yes, Plain and Multisupport patterns can be used together. Multisupport can use any imposed displacement, velocity, or acceleration. This is part of my code: set xDamp 0.05; set nEigenI 1; set nEigenJ 2; set lambdaN [eigen [expr $nEigenJ]]; set lambdaI [lindex $lambdaN [expr $nEigenI-1]]; set lambd...
by chicken
Thu Dec 10, 2020 2:21 am
Forum: OpenSees.exe Users
Topic: an pattern Plain and Pattern Multisupport not be used together?
Replies: 5
Views: 4467

an pattern Plain and Pattern Multisupport not be used together?

I would like to ask the first question: can pattern Plain and Pattern Multisupport not be used together? The second question is whether pattern Multisupport can only add ground vibration. I am looking forward to your reply :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D