|
|
|
|
The gravity loads can be placed into a file, called GravityLoads.tcl with the following commands:
pattern Plain 1 Linear {
load 3 0.0 -2000 -168074
load 4 0.0 -2000 168074
}
constraints Transformation
numberer RCM
system BandGeneral
test NormDispIncr 1.0e-6 6
algorithm Newton
integrator LoadControl 0.1
analysis Static
analyze 10
loadConst -time 0.0
This file can be sourced in after the example.tcl file:
source example.tcl
source GravityLoads.tcl
|
|
|