This command is used to construct an Eligehousen bond material object with damage.
uniaxiaMaterial Bond02 $matTag $u1p $q1p $u2p $u3p $q3p $u1n $q1n $u2n $u3n $q3n $s0 $bb $alp $aln
$matTag |
unique material object integer tag |
|
$u1p |
$q1p |
slip and bond at first detachment -- tensile bond-slip backbone |
$u2p |
|
slip at start of degradation -- tensile bond-slip backbone |
$u3p |
$q3p |
slip and bond at ultimate -- tensile bond-slip backbone |
$u1n |
$q1n |
slip and bond at first detachment -- compressive bond-slip backbone* |
$u2n |
|
slip at start of degradation -- compressive bond-slip backbone* |
$u3n |
$q3n |
slip and bond at ultimate -- compressive bond-slip backbone* |
$s0 |
|
unloading stiffness |
$bb |
|
exponent for the first branch of the backbone (prior to first detachment). i.e. q=u$bb |
$alp |
|
damage factor for positive quadrant |
$aln |
|
damage factor for negative quadrant |
*NOTE: Compressive concrete parameters should be input as negative values.