ViscousDamper Material

From OpenSeesWiki
Revision as of 23:23, 21 August 2013 by D.lignos (talk | contribs)
Jump to navigationJump to search




This command is used to construct a ViscousDamper material, which represents the Maxwell Model (linear spring and nonlinear dashpot in series). The ViscousDamper material simulates the hysteretic response of viscous dampers.

uniaxialMaterial ViscousDamper $matTag $K $Cd $alpha

$matTag integer tag identifying material
$K Elastic stiffness of linear spring (to model the axial flexibility of a viscous damper (brace and damper portion)
$Cd Viscous parameter of damper
$alpha Viscous damper exponent

Examples:

1. Input parameters:
Assume a viscous damper with axial stiffness K=300.0kN/mm, viscous parameter Cd=280.3kN(s/mm)0.3, and exponent a=0.30.
The input parameters for the material should be as follows:
uniaxialMaterial ViscousDamper 1 300 280.3 0.30
Using these properties, Figure 1 shows the hysteretic response of this damper for sinusoidal displacement increments of 12, 24 and 36mm and a frequency f = 0.5Hz.
The sensitivity of the viscous damper with respect to its axial stiffness is shown in Figures 2 to 4 for the following set of parameters:
Error creating thumbnail: File with dimensions greater than 12.5 MP
Viscous Damper with various input parameter variations
2. Single story single bay frame with viscous damper

References:

[1] Oohara, K., and Kasai, K. (2002), “Time-History Analysis Models for Nonlinear Viscous Dampers”, Proc. Structural Engineers World Congress (SEWC), Yokohama, JAPAN, CD-ROM, T2-2-b-3 (in Japanese).
[2] Kasai K, Oohara K. “Algorithm and Computer Code To Simulate Response of Nonlinear Viscous Damper” Passively Controlled Structure Symposium 2001, Yokohama, Japan (in Japanese).

Code Developed by : Prof. Kazuhiko Kasai (Tokyo Institute of Technology) and implemented by Sarven Akcelyan & Prof. Dimitrios G. Lignos, (McGill University)