ElasticBilin Material

• Command_Manual
  • Tcl Commands
  • Modeling_Commands
    • model
    • uniaxialMaterial
    • ndMaterial
    • frictionModel
    • section
    • geometricTransf
    • element
    • node
    • sp commands
      • fix
      • fixX
      • fixY
      • fixZ
    • mp commands
      • equalDOF
      • rigidDiaphragm
      • rigidLink
    • timeSeries
    • pattern
    • mass
    • block commands
      • block2D
      • block3D
    • region
    • rayleigh
  • Analysis Commands
    • constraints Command
    • numberer Command
    • system Command
    • test Command
    • algorithm Command
    • integrator Command
    • analysis Command
    • eigen Command
    • analyze Command
  • Output Commands
    • recorder
    • record
    • print
    • printA
    • logFile
    • RealTime_Output_Commands
  • Misc Commands
    • eleResponse Command
    • getTime Command
    • getEleTags Command
    • getNodeTags
    • loadConst Command
    • nodeCoord Command
    • nodeDisp Command
    • nodeVel Command
    • nodeAccel Command
    • nodeEigenvector Command
    • nodeBounds
    • print Command
    • remove Command
    • reset Command
    • testIter
    • testNorms
    • wipe Command
    • exit Command
  • DataBase Commands
    • Template:DataBaseCommandsMenu

---

This command is used to construct an elastic bilinear uniaxial material object. Unlike all other bilinear materials, the unloading curve follows the loading curve exactly.

uniaxialMaterial ElasticBilin $matTag $EP1 $EP2 $epsP2 <$EN1 $EN2 $epsN2>

---

$matTag	integer tag identifying material
$EP1	tangent in tension for stains: 0 <= strains <= $epsP2
$EP2	tangent when material in tension with strains > $epsP2
$epsP2	strain at which material changes tangent in tension.
$EN1	optional, default = $EP1. tangent in compression for stains: 0 < strains <= $epsN2
$EN2	optional, default = $EP2. tangent in compression with strains < $epsN2
$epsN2	optional, default = -epsP2. strain at which material changes tangent in compression.

NOTE:

eps0 can not be controlled. It is always zero.

---

Code Developed by: fmk