BuildingTcl -- addLoad: LoadTypeLabel UniformEQ3D

Commands

addLoadData LoadLabel $LoadLabel

addLoadData LoadTypeLabel UniformEQ2D

addLoadData GMfilenameX $GMfilenameX

addLoadData GMfilenameY $GMfilenameY

addLoadData GMfilenameZ $GMfilenameZ

<addLoadData LoadDescription $LoadDescription>

<addLoadData GMscaleX $GMscaleX>

<addLoadData GMscaleY $GMscaleY>

<addLoadData GMscaleZ $GMscaleZ>

<addLoadData GMdirectory $GMdirectory>

<addLoadData FileType $FileType>

<addLoadData GMfactor $GMfactor>

addLoad

Arguments

$LoadLabel 

Unique Load Label for reference

$GMfilenameX 

Ground-motion filename for X direction

$GMfilenameY 

Ground-motion filename for Y direction

$GMfilenameZ 

Ground-motion filename for Z direction

$LoadDescription 

Text. Optional, default = blank {}

$GMscaleX 

Ground-motion scaling factor for $GMfilenameX. Optional, default = 1.0

$GMscaleY 

Ground-motion scaling factor for $GMfilenameY. Optional, default = 1.0

$GMscaleZ 

Ground-motion scaling factor for $GMfilenameZ. Optional, default = 1.0

$GMdirectory 

Directory location for ALL ground-motion files. Optional, default = . (current)

$FileType 

File type for ALL ground-motion files. Optional, default = PEER

Options

• PEER
• Time&Acceleration
• AccelerationOnly
• PEERNGA

$GMfactor 

Ground-motion factor for ALL ground-motion directions. Optional, default = $g

Notes

The addLoad command must be placed at the end of each Load-data definition, as it takes all data defined since the last addLoad command and define the Load.

Options

---

BuildingTcl -- addLoad

Return to BuildingTcl Command Language Manual