error while running OpenSeesSP

This forum is for issues related to parallel processing
and OpenSees using the new interpreters OpenSeesSP and OpenSeesMP

error while running OpenSeesSP

Postby lvhai » Wed Nov 25, 2009 12:44 am

In my lab, I have there PC servers which have been intsalled RedHat AS OS and Openmpi in.

I have compiled OpenSeesSP successfully, and I tested OpenSeesSP with example in OpenSees source dir(OpenSees/EXAMPLES/ TeraGridExamples/Example1.tcl), it worked fine.

But when i run another example with OpenSeesSP like this

mpirun -np 3 ./OpenSeesSP ./Ex8.GoAll.tcl

Errors occurred. Actually, as long as the parameter –np is \>1 , those errors occurred

I don't get what is the problem.



I used precompiled windows version OpenSeesSP(downloaded from [url]http://opensees.berkeley.edu/[/url]) to run this script, I got the same error. But serial version OpenSees worked.

Both OpenSeesSP and serial version OpenSees use the same tcl script it that right?





Could anyone help me figure out what is going on ?

Thanks a lot.

Ex8.GoAll.tcl is download from [url]http://opensees.berkeley.edu.sixxs.org/OpenSees/manuals/ExamplesManual/HTML/[/url], in 3D Structural Modelling & Analysis Examples


errors are:





Slave Process Running 1

Slave Process Running 2

Master Process Running OpenSees Interpreter 0





OpenSees -- Open System For Earthquake Engineering Simulation

Pacific Earthquake Engineering Research Center -- 2.1.0



(c) Copyright 1999,2000 The Regents of the University of California

All Rights Reserved

(Copyright and Disclaimer @ [url]http://www.berkeley.edu/OpenSees/copyright.html[/url])



----------------- Steel W section ---------------

-- W-Section: Elastic Uniaxial or Fiber Section, Nonlinear Element --

-- Uniform Earthquake Excitation --

Number of Stories in Y: 2 Number of bays in X: 2 Number of bays in Z: 2

goGravity

WARNING ArrayOfTaggedObjects::addComponent() - component with tag already exists, not adding component with tag: 0

WARNING: LoadPattern::addElementalLoad() - load could not be added

Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load

Transverse (y): 0

Transverse (z): 0

Axial (x): -0.0095

Element : 20101



WARNING ArrayOfTaggedObjects::addComponent() - component with tag already exists, not adding component with tag: 0

WARNING: LoadPattern::addElementalLoad() - load could not be added

Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load

Transverse (y): 0

Transverse (z): 0

Axial (x): -0.0095

Element : 20102



WARNING ArrayOfTaggedObjects::addComponent() - component with tag already exists, not adding component with tag: 0

WARNING: LoadPattern::addElementalLoad() - load could not be added

Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load

Transverse (y): 0

Transverse (z): 0

Axial (x): -0.0095

Element : 30100



WARNING ArrayOfTaggedObjects::addComponent() - component with tag already exists, not adding component with tag: 0

WARNING: LoadPattern::addElementalLoad() - load could not be added

[node0:32295] *** An error occurred in MPI_Recv

[node0:32295] *** on communicator MPI_COMM_WORLD

[node0:32295] *** MPI_ERR_TRUNCATE: message truncated

[node0:32295] *** MPI_ERRORS_ARE_FATAL (your MPI job will now abort)

--------------------------------------------------------------------------

mpirun has exited due to process rank 1 with PID 32295 on

node node0 exiting without calling "finalize". This may

have caused other processes in the application to be

terminated by signals sent by mpirun (as reported here).

--------------------------------------------------------------------------

[node0:32293] 1 more process has sent help message help-mpi-errors.txt / mpi_errors_are_fatal

[node0:32293] Set MCA parameter "orte_base_help_aggregate" to 0 to see all help / error messages

Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load

Transverse (y): 0

Transverse (z): 0

Axial (x): -0.0095

Element : 30101



WARNING ArrayOfTaggedObjects::addComponent() - component with tag already exists, not adding component with tag: 0

WARNING: LoadPattern::addElementalLoad() - load could not be added

Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load

Transverse (y): 0

Transverse (z): 0

Axial (x): -0.0095

Element : 20200



WARNING ArrayOfTaggedObjects::addComponent() - component with tag already exists, not adding component with tag: 0

WARNING: LoadPattern::addElementalLoad() - load could not be added

Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load

Transverse (y): 0

Transverse (z): 0

Axial (x): -0.0095

Element : 20201



WARNING ArrayOfTaggedObjects::addComponent() - componentWARNING ArrayOfTaggedObjects::addComponent() - component with tag already exists, not adding component with tag: 0

WARNING: LoadPattern::addElementalLoad() - load could not be added

Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load

Transverse (y): 0

Transverse (z): 0

Axial (x): -0.0095

Element : 30200



with tag already exists, not adding component with tag: 0

WARNING: LoadPattern::addElementalLoad() - load could not be added

Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load

Transverse (y): 0

Transverse (z): 0

Axial (x): -0.0095

Element : 20202



WARNING ArrayOfTaggedObjects::addComponent() - component with tag already exists, not adding component with tag: 0

WARNING: LoadPattern::addElementalLoad() - load could not be added

Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load

Transverse (y): 0

Transverse (z): 0

Axial (x): -0.0095

Element : 30201



WARNING ArrayOfTaggedObjects::addComponent() - componentWARNING ArrayOfTaggedObjects::addComponent() - component with tag already exists, not adding component with tag: 0

WARNING: LoadPattern::addElementalLoad() - load could not be added

Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load

Transverse (y): 0

Transverse (z): 0

Axial (x): -0.0095

Element : 20300



with tag already exists, not adding component with tag: 0

WARNING: LoadPattern::addElementalLoad() - load could not be added

Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load

Transverse (y): 0

Transverse (z): 0

Axial (x): -0.0095

Element : 30202



WARNING ArrayOfTaggedObjects::addComponent() - component with tag already exists, not adding component with tag: 0

WARNING: LoadPattern::addElementalLoad() - load could not be added

Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load

Transverse (y): 0

Transverse (z): 0

Axial (x): -0.0095

Element : 20301



WARNING ArrayOfTaggedObjects::addComponent() - componentWARNING ArrayOfTaggedObjects::addComponent() - component with tag already exists, not adding component with tag: 0

WARNING: LoadPattern::addElementalLoad() - load could not be added

Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load

Transverse (y): 0

Transverse (z): 0

Axial (x): -0.0095

Element : 30300



with tag already exists, not adding component with tag: 0

WARNING: LoadPattern::addElementalLoad() - load could not be added

Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load

Transverse (y): 0

Transverse (z): 0

Axial (x): -0.0095

Element : 20302



WARNING ArrayOfTaggedObjects::addComponent() - component with tag already exists, not adding component with tag: 0

WARNING: LoadPattern::addElementalLoad() - load could not be added

Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load

Transverse (y): 0

Transverse (z): 0

Axial (x): -0.0095

Element : 30301



WARNING ArrayOfTaggedObjects::addComponent() - componentWARNING ArrayOfTaggedObjects::addComponent() - component with tag already exists, not adding component with tag: 0

WARNING: LoadPattern::addElementalLoad() - load could not be added

Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load

Transverse (y): -0.307833

Transverse (z): 0

Axial (x): 0

Element : 1.0201e+06



with tag already exists, not adding component with tag: WARNING ArrayOfTaggedObjects::addComponent() - component with tag already exists, not adding component with tag: 0

WARNING: LoadPattern::addElementalLoad() - load could not be added

Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load

Transverse (y): -0.307833

Transverse (z): 0

Axial (x): 0

Element : 1.0201e+06



WARNING ArrayOfTaggedObjects::addComponent() - component with tag already exists, not adding component with tag: 0

WARNING: LoadPattern::addElementalLoad() - load could not be added

Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load

Transverse (y): -0.307833

Transverse (z): 0

Axial (x): 0

Element : 1.0301e+06



0WARNING ArrayOfTaggedObjects::addComponent() - component with tag already exists, not adding component with tag: 0

WARNING: LoadPattern::addElementalLoad() - load could not be added

Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load

Transverse (y): -0.307833

Transverse (z): 0

Axial (x): 0

Element : 1.0301e+06



WARNING ArrayOfTaggedObjects::addComponent() - component with tag already exists, not adding component with tag: 0

WARNING: LoadPattern::addElementalLoad() - load could not be added

Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load

Transverse (y): -0.307833

Transverse (z): 0

Axial (x): 0

Element : 1.0202e+06





WARNING: LoadPattern::addElementalLoad() - load could not be added

Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load

Transverse (y): 0

Transverse (z): 0

Axial (x): -0.0095

Element : 30302



WARNING ArrayOfTaggedObjects::addComponent() - componentWARNING ArrayOfTaggedObjects::addComponent() - component with tag already exists, not adding component with tag: 0

WARNING: LoadPattern::addElementalLoad() - load could not be added

Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load

Transverse (y): -0.307833

Transverse (z): 0

Axial (x): 0

Element : 1.0302e+06



with tag already exists, not adding component with tag: 0

WARNING: LoadPattern::addElementalLoad() - load could not be added

Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load

Transverse (y): -0.307833

Transverse (z): 0

Axial (x): 0

Element : 1.0202e+06



WARNING ArrayOfTaggedObjects::addComponent() - component with tag already exists, not adding component with tag: 0

WARNING: LoadPattern::addElementalLoad() - load could not be added

Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load

Transverse (y): -0.307833

Transverse (z): 0

Axial (x): 0

Element : 1.0302e+06



WARNING ArrayOfTaggedObjects::addComponent() - component with tag already exists, not adding component with tag: 0

WARNING: LoadPattern::addElementalLoad() - load could not be added

Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load

Transverse (y): -0.307833

Transverse (z): 0

Axial (x): 0

Element : 1.0203e+06



WARNING ArrayOfTaggedObjects::addComponent() - component with tag already exists, not adding component with tag: 0

WARNING: LoadPattern::addElementalLoad() - load could not be added

Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load

Transverse (y): -0.307833

Transverse (z): 0

Axial (x): 0

Element : 1.0203e+06



WARNING ArrayOfTaggedObjects::addComponent() - component with tag already exists, not adding component with tag: 0

WARNING: LoadPattern::addElementalLoad() - load could not be added

Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load

Transverse (y): -0.307833

Transverse (z): 0

Axial (x): 0

Element : 1.0303e+06



WARNING ArrayOfTaggedObjects::addComponent() - componentWARNING ArrayOfTaggedObjects::addComponent() - component with tag already exists, not adding component with tag: 0

WARNING: LoadPattern::addElementalLoad() - load could not be added

Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load

Transverse (y): -0.00783333

Transverse (z): 0

Axial (x): 0

Element : 2.0201e+06



with tag already exists, not adding component with tag: WARNING ArrayOfTaggedObjects::addComponent() - component with tag already exists, not adding component with tag: 0

WARNING: LoadPattern::addElementalLoad() - load could not be added

Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load

Transverse (y): -0.00783333

Transverse (z): 0

Axial (x): 0

Element : 2.0201e+06



0

WARNING: LoadPattern::addElementalLoad() - load could not be added

Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load

Transverse (y): -0.307833

Transverse (z): 0

Axial (x): 0

Element : 1.0303e+06



WARNING ArrayOfTaggedObjects::addComponent() - componentWARNING ArrayOfTaggedObjects::addComponent() - component with tag already exists, not adding component with tag: 0

WARNING: LoadPattern::addElementalLoad() - load could not be added

Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load

Transverse (y): -0.00783333

Transverse (z): 0

Axial (x): 0

Element : 2.0301e+06



with tag already exists, not adding component with tag: WARNING ArrayOfTaggedObjects::addComponent() - component with tag already exists, not adding component with tag: 0

WARNING: LoadPattern::addElementalLoad() - load could not be added

Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load

Transverse (y): -0.00783333

Transverse (z): 0

Axial (x): 0

Element : 2.0301e+06



0

WARNING: LoadPattern::addElementalLoad() - load could not be added

Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load

Transverse (y): -0.00783333

Transverse (z): 0

Axial (x): 0

Element : 2.0201e+06



WARNING ArrayOfTaggedObjects::addComponent() - componentWARNING ArrayOfTaggedObjects::addComponent() - component with tag already exists, not adding component with tag: 0

WARNING: LoadPattern::addElementalLoad() - load could not be added

Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load

Transverse (y): -0.00783333

Transverse (z): 0

Axial (x): 0

Element : 2.0202e+06



with tag already exists, not adding component with tag: 0

WARNING: LoadPattern::addElementalLoad() - load could not be added

Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load

Transverse (y): -0.00783333

Transverse (z): 0

Axial (x): 0

Element : 2.0301e+06



WARNING ArrayOfTaggedObjects::addComponent() - component with tag already exists, not adding component with tag: 0

WARNING: LoadPattern::addElementalLoad() - load could not be added

Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load

Transverse (y): -0.00783333

Transverse (z): 0

Axial (x): 0

Element : 2.0202e+06



WARNING ArrayOfTaggedObjects::addComponent() - componentWARNING ArrayOfTaggedObjects::addComponent() - component with tag already exists, not adding component with tag: 0

WARNING: LoadPattern::addElementalLoad() - load could not be added

Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load

Transverse (y): -0.00783333

Transverse (z): 0

Axial (x): 0

Element : 2.0302e+06



with tag already exists, not adding component with tag: 0

WARNING: LoadPattern::addElementalLoad() - load could not be added

Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load

Transverse (y): -0.00783333

Transverse (z): 0

Axial (x): 0

Element : 2.0202e+06



WARNING ArrayOfTaggedObjects::addComponent() - component with tag already exists, not adding component with tag: 0

WARNING: LoadPattern::addElementalLoad() - load could not be added

Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load

Transverse (y): -0.00783333

Transverse (z): 0

Axial (x): 0

Element : 2.0302e+06



WARNING ArrayOfTaggedObjects::addComponent() - component with tag already exists, not adding component with tag: 0

WARNING: LoadPattern::addElementalLoad() - load could not be added

Domain::addNodalLoad() - no pattern with tag101in the model, not adding the ele loadBeam3dUniformLoad - Reference load

Transverse (y): -0.00783333

Transverse (z): 0

Axial (x): 0

Element : 2.0302e+06



FEM_ObjectBrokerAllClasses::getNewRecordr - - no ConstraintHandler type exists for class tag 9

FEM_ObjectBrokerAllClasses::getNewRecordr - - no ConstraintHandler type exists for class tag 9
lvhai
 
Posts: 7
Joined: Sat Sep 19, 2009 10:13 pm
Location: bjut

Re: error while running OpenSeesSP

Postby lsquinones » Wed Nov 25, 2009 7:33 am

That "makefile.def" used to compile OpenSees?
lsquinones
 
Posts: 14
Joined: Wed Jul 29, 2009 2:03 pm
Location: Ecuador

Re: error while running OpenSeesSP

Postby lvhai » Wed Nov 25, 2009 10:19 pm

[quote="lsquinones"]That "makefile.def" used to compile OpenSees?[/quote]
I used Makefile.def.LINUX_RedHat_ENTERPRISE
lvhai
 
Posts: 7
Joined: Sat Sep 19, 2009 10:13 pm
Location: bjut

Re: error while running OpenSeesSP

Postby lsquinones » Thu Dec 03, 2009 9:38 am

You should have edited the Makefile.def.LINUX_RedHat_ENTERPRISE, upload the latest version of the makefile for review.
lsquinones
 
Posts: 14
Joined: Wed Jul 29, 2009 2:03 pm
Location: Ecuador


Return to Parallel Processing

Who is online

Users browsing this forum: No registered users and 1 guest