Hysteretic material reference

For posts concerning the documentation, errors, ommissions, general comments, etc.

Moderators: silvia, selimgunay, Moderators

Post Reply
cchisari
Posts: 6
Joined: Wed Mar 16, 2016 2:10 am
Location: University of Salerno

Hysteretic material reference

Post by cchisari » Fri Oct 14, 2016 4:24 am

Dear all,

I would like to understand (and report in a paper) the exact formulation of the degradation rules for the Hysteretic material.

Unfortunately, no academic reference is provided in the manual (expect for the qualitative aspects shown in http://opensees.berkeley.edu/OpenSees/m ... l/4052.htm) and I am not able to formulate these rules reading from the source code.

Please can anyone help me with any reference?

Thank you and best regards,

cchisari

aylsworth
Posts: 20
Joined: Wed Mar 22, 2017 3:39 am
Location: University of the Philippines

Re: Hysteretic material reference

Post by aylsworth » Sat Sep 02, 2017 9:54 am

I also have the same question. But I think the best way is to just add a new hysteretic material with specific degradation rule

aylsworth
Posts: 20
Joined: Wed Mar 22, 2017 3:39 am
Location: University of the Philippines

Re: Hysteretic material reference

Post by aylsworth » Mon Nov 20, 2017 7:51 am

Hi. I think I found the reference for this hysteretic material. Check "Modeling of cyclic shear behavior in RC members" by Angelo D'Ambrisi and Filip Filippou (1999). I think this is where this uniaxialmaterial was taken

cchisari wrote:
> Dear all,
>
> I would like to understand (and report in a paper) the exact formulation of
> the degradation rules for the Hysteretic material.
>
> Unfortunately, no academic reference is provided in the manual (expect for
> the qualitative aspects shown in
> http://opensees.berkeley.edu/OpenSees/m ... l/4052.htm) and I am
> not able to formulate these rules reading from the source code.
>
> Please can anyone help me with any reference?
>
> Thank you and best regards,
>
> cchisari

Post Reply