how it is possible to create hysteric material for following figure which is a load-displacement curve.
https://1drv.ms/u/s!AuCoXBhjXOhkiIMQBUd86MPrIV7ygA
Hysteric curve for following figure
Moderators: silvia, selimgunay, Moderators
-
- Posts: 160
- Joined: Mon Feb 02, 2015 6:32 pm
Hysteric curve for following figure
Prafulla Malla, Nepal
Praf_malla@hotmail.com
Praf_malla@hotmail.com
-
- Posts: 43
- Joined: Fri Jan 29, 2016 10:20 pm
Re: Hysteric curve for following figure
Dear Prafullamalla
Its very difficult to provide some help based on the information that is provided. Please provide more specific information, such as what is the structure, what kind of loading you are planning to apply, what the structure is made of etc...
Regards
Its very difficult to provide some help based on the information that is provided. Please provide more specific information, such as what is the structure, what kind of loading you are planning to apply, what the structure is made of etc...
Regards
-
- Posts: 160
- Joined: Mon Feb 02, 2015 6:32 pm
Re: Hysteric curve for following figure
Actually, I want to input this value of load-displacement in the hysteric material. but, however, we can input only 3 points. Its bolted connection in reinforced concrete
Prafulla Malla, Nepal
Praf_malla@hotmail.com
Praf_malla@hotmail.com