About Modified IMK Model Parameters
Moderators: silvia, selimgunay, Moderators
-
- Posts: 22
- Joined: Fri Mar 31, 2017 5:37 am
- Location: Middle East Technical University
About Modified IMK Model Parameters
Dear friends,
I am in need of three parameters for ModIMKPinching Material model in Opensees. Could you provide me the definitions and literature values for three parameters listed below:
$FprPos Ratio of the force at which reloading begins to force corresponding to the maximum historic deformation demand (positive loading direction)
$FprNeg Ratio of the force at which reloading begins to force corresponding to the absolute maximum historic deformation demand (negative loading direction)
$A_Pinch Ratio of reloading stiffness
Thanks in advance,
Demirhan
PhD Candidate
I am in need of three parameters for ModIMKPinching Material model in Opensees. Could you provide me the definitions and literature values for three parameters listed below:
$FprPos Ratio of the force at which reloading begins to force corresponding to the maximum historic deformation demand (positive loading direction)
$FprNeg Ratio of the force at which reloading begins to force corresponding to the absolute maximum historic deformation demand (negative loading direction)
$A_Pinch Ratio of reloading stiffness
Thanks in advance,
Demirhan
PhD Candidate
-
- Posts: 22
- Joined: Fri Mar 31, 2017 5:37 am
- Location: Middle East Technical University
Re: About Modified IMK Model Parameters
any ideas? still looking for the parameter explanations.
-
- Posts: 913
- Joined: Mon Sep 09, 2013 8:50 pm
- Location: University of California, Berkeley
Re: About Modified IMK Model Parameters
It may be useful to directly contact Dimitiros Lignos in EPFL Zurich.
-
- Posts: 22
- Joined: Fri Mar 31, 2017 5:37 am
- Location: Middle East Technical University
Re: About Modified IMK Model Parameters
Dit it and unfortunately no replies