PressureDependMultiYield-Example 8-Excess PWP Problem

Forum for OpenSees users to post questions, comments, etc. on the use of the OpenSees interpreter, OpenSees.exe

Moderators: silvia, selimgunay, Moderators

Post Reply
maryammf
Posts: 47
Joined: Mon Oct 24, 2016 12:37 pm
Location: Istanbul Technical University

PressureDependMultiYield-Example 8-Excess PWP Problem

Post by maryammf » Thu Oct 19, 2017 2:03 am

Dear all,

I decided to run the code for the example 8 which is used for the PressureDEpendMultiYield material in the OpenSees website and the link is as:
http://opensees.berkeley.edu/wiki/index ... -Example_8
I ran the same code but I got negative excess pore water pressure for the elements; all the results are the same as the graphs in the example just the excess pore water pressure is in the same value but negative! I will appreciate your suggestions in this case.

Many thanks,
Maryam

Post Reply