Different Methods of Calculating Target Displacement

Forum for OpenSees users to post questions, comments, etc. on the use of the OpenSees interpreter, OpenSees.exe

Moderators: silvia, selimgunay, Moderators

Post Reply
aliye
Posts: 2
Joined: Sun Jun 25, 2017 10:38 pm

Different Methods of Calculating Target Displacement

Post by aliye » Mon Jun 26, 2017 12:40 am

I wana do pushover analysis & I need to calculate Target displacement
Did anyone write calculation of Target Displacement Code with different methods like Coefficient Displacement Method, Capacity Spectrum Method, N2, Energy, MPA,.. ??
I will be thankful who help me

selimgunay
Posts: 913
Joined: Mon Sep 09, 2013 8:50 pm
Location: University of California, Berkeley

Re: Different Methods of Calculating Target Displacement

Post by selimgunay » Mon Jun 26, 2017 9:40 am

Once you get the OpenSees results, you need a seperate code in Matlab, python, etc. to use the coefficient method, capacity spectrum, etc. I can send an example.

aliye
Posts: 2
Joined: Sun Jun 25, 2017 10:38 pm

Re: Different Methods of Calculating Target Displacement

Post by aliye » Tue Jun 27, 2017 5:42 am

Thank for your helpful response.....I wrote some Codes of Matlab for these methods....but I didn't yet verify them ....If you have matlab Codes, sending of them can help me so much...
my Email: aliyepoutari@yahoo.com
thanks a lot

zhangbao
Posts: 1
Joined: Fri May 05, 2017 1:38 am
Location: Lanzhou University of Technology

Re: Different Methods of Calculating Target Displacement

Post by zhangbao » Mon Jul 24, 2017 6:54 am

:) Can you send code of Matlab for target displacement method to me?
my Email :2551427789@qq.com
thanks a lot

Post Reply