FatigueMATERIAL:Material tag 2 failed at pseudo peak

Forum for OpenSees users to post questions, comments, etc. on the use of the OpenSees interpreter, OpenSees.exe

Moderators: silvia, selimgunay, Moderators

Post Reply
alichelsea
Posts: 4
Joined: Wed Jul 29, 2015 8:44 am
Location: iiees

FatigueMATERIAL:Material tag 2 failed at pseudo peak

Post by alichelsea » Fri Aug 28, 2015 4:17 am

Hi All,
I modeled 4Story steel frame with chevron bracing and I used steel 02 material with fatigue effect and I ran IDA Analysis on my model during my IDA analysis below messages appears:
FatigueMATERIAL:Material tag 2 failed at pseudo peak DOES IT mean that the frame Collapsed? What does it mean?
Thanks a lot
Top
fmk
Site Admin
Posts: 5883
Joined: Fri Jun 11, 2004 2:33 pm
Location: UC Berkeley
Contact:
Contact fmk

Re: FatigueMATERIAL:Material tag 2 failed at pseudo peak

Post by fmk » Fri Aug 28, 2015 12:53 pm

no it does not mean the building collapsed (it may have formed a mech but only would would know) .. it means what it says "the material failed"
Top
nilz
Posts: 34
Joined: Sat Nov 12, 2016 7:03 am
Location: Ferdowsi university of mashhad

Re: FatigueMATERIAL:Material tag 2 failed at pseudo peak

Post by nilz » Sat Dec 02, 2017 4:48 am

Hi alichelsea
Do you use Terzic code for modeling chevron braced frame?
Top
Post Reply

Return to “OpenSees.exe Users”